Specifications Index
XL7 SPECIFICATIONS INDEX
| System | Specification/Procedure | |
|---|---|---|
| Air Conditioning | ||
| Service | REFRIGERANT SYSTEM CAPACITIES | |
| Torque | FASTENER TIGHTENING SPECIFICATIONS - HVAC - AUTOMATIC | |
| Axle Nut/Hub Nut | ||
| Front | 151 ft. lbs. (205 N.m) | |
| Rear | 81 ft. lbs. 110 N.m | |
| Battery | BATTERY USAGE | |
| Brakes | ||
| Bleeding Sequence | ANTI-LOCK BRAKE SYSTEM AUTOMATED BLEED PROCEDURE | |
| Front Disc Brakes | SPECIFICATIONS | |
| Rear Disc Brakes | SPECIFICATIONS | |
| Torque | FASTENER TIGHTENING SPECIFICATIONS - HYDRAULIC BRAKES | |
| Charging | ||
| Generator | GENERATOR USAGE | |
| Torque | FASTENER TIGHTENING SPECIFICATIONS - ENGINE ELECTRICAL | |
| Drive Belts | ||
| Adjustment | DRIVE BELT TENSIONER DIAGNOSIS | |
| Belt Routing | INSTALLATION PROCEDURE | |
| Engine Cooling | ||
| General Service Specifications | APPROXIMATE FLUID CAPACITIES | |
| Radiator Cap Pressure | 16 psi | |
| Thermostat R & I | THERMOSTAT REPLACEMENT | |
| Water Pump R & I | WATER PUMP REPLACEMENT | |
| Engine Mechanical | ||
| Compression | ENGINE COMPRESSION TEST | |
| Oil Pressure | Oil pressure is 10 psi - 69 kPa @ idle. Oil pressure is 20 psi - 138 kPa @ 2000 RPM |
|
| Overhaul | ENGINE MECHANICAL SPECIFICATIONS | |
| Torque | FASTENER TIGHTENING SPECIFICATIONS - ENGINE MECHANICAL - 3.6L (LY7) | |
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | |
| Flywheel/Flexplate Torque | 22 ft. lbs. (30 N.m) additional 45° tightening using the J-45059 |
|
| Fuel System | ||
| Fuel Filter | FUEL FILTER | |
| Pressure Specifications | 55-60 psi (380-410 kPa) | |
| Fuel Pressure Test Procedure | CIRCUIT/SYSTEM TESTING | |
| Fuel Pressure Release Procedure | FUEL PRESSURE RELIEF (WITH J 34730-1A) or FUEL PRESSURE RELIEF (WITHOUT J 34730-1A) | |
| Ignition | ||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | |
| Ignition Wires (Resistance) | DIAGNOSTIC INFORMATION AND PROCEDURES | |
| Ignition Wires (Routing) | DIAGNOSTIC INFORMATION AND PROCEDURES | |
| Spark Plugs | IGNITION SYSTEM SPECIFICATIONS | |
| Starting | ||
| Starter | N/A | |
| Torque | FASTENER TIGHTENING SPECIFICATIONS - ENGINE ELECTRICAL | |
| Wheel Alignment | ||
| Adjustment Specifications | Front: WHEEL ALIGNMENT SPECIFICATIONS , Rear: WHEEL ALIGNMENT SPECIFICATIONS | |
| Torque | For front suspension, refer to FASTENER TIGHTENING SPECIFICATIONS - FRONT SUSPENSION . For rear suspension, refer to FASTENER TIGHTENING SPECIFICATIONS - REAR SUSPENSION . | |
| Wheel & Tire | ||
| Lug Nut Torque | 100 ft. lbs. (140 N.m) | |