LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Reno Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Diagnostic Information and Procedures >> DTC P0606: Transaxle Control Module Processor Fault >> Circuit Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Description

In case that TCM reset has occurred by software (warm reset) not by ignition key ON, TCM increments software reset counter. If the counter exceeds the permissible maximum value for the software count then the fault will be detected.