LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Reno Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Electrical Devices >> Engine Electrical Devices >> Accelerator Pedal Module (APM) Removal and Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Accelerator Pedal Module (APM) Removal and Installation: Removal

  1. Turn the ignition switch OFF.
  2. Disconnect the Electric Throttle Control (ETC) connector from the APM.
  3. Remove the bolts, three places, attaching the APM to the APM support bracket.
    Fig 1: APM Support Bracket Bolts
    G04716368Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals