Electronic Control System Description

The electronic control system consists of 1) various sensors which detect the state of engine and driving conditions, 2) ECM which controls various devices according to the signals from the sensors and 3) various controlled devices. Functionally, it is divided into the following sub systems:

• Fuel injection control system
• Ignition control system
• IMT valve control system
• Electric Throttle Body Control System
• Fuel pump control system
• Radiator cooling fan control system
• Evaporative emission control system
• A/F sensor heater control system
• HO2S heater control system
• A/C control system
• Immobilizer control system
• Generator control system
• Controller (computer) communication system

Especially, ECM, BCM, combination meter, TCM, ABS / ESP® control module, 4WD control module, keyless start control module and ID controller intercommunicate by means of CAN (Controller Area Network) communication. Refer to ENGINE AND EMISSION CONTROL SYSTEM FLOW DIAGRAM  and ECM INPUT / OUTPUT CIRCUIT DIAGRAM .