LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Swift + >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System & Remote Functions >> Repair Instructions >> Remote Control Door Lock Receiver Replacement (Notchback) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Locating Remote Control Door Lock Receiver
    GM1859919Courtesy of GENERAL MOTORS CORP.
  1. Install the control module/receiver on its mounting bracket.
  2. Connect the control module/receiver electrical connector.
    3. NOTE: Refer to Fastener Notice .
  3. Install the knee bolster with bolts.

    Tighten:  Tighten the driver's side knee bolster mounting bolts to 10 N m (89 lb in).

  4. Install the instrument panel under cover.
  5. Connect the hood release cable to the hood latch release handle.
  6. Install the screws.
  7. Connect the negative battery cable.
  8. Complete remote keyless transmitter programmming. Refer to Transmitter Programming 
scientia non olet · About LEMON Manuals