Terminals And Reference Values For TCM

Data are reference value and are measured between each terminal and ground.

Terminal No.	Wire color	Item	Condition		Data (Approx.)
1	R/B	Power supply (Memory back-up)	Always		Battery voltage
2	R/B	Power supply (Memory back-up)	Always		Battery voltage
3	L	CAN H	-		-
4	V	K-line (SDT signal)	The terminal is connected to the data link connector for SDT.		-
5	B	Ground	Always		0V
6	W/G	Power supply	Courtesy of SUZUKI OF AMERICA CORP.	-	Battery voltage
			Courtesy of SUZUKI OF AMERICA CORP.	-	0V
7	LG	Back-up lamp relay	Courtesy of SUZUKI OF AMERICA CORP.	Selector lever in "R" position.	0V
				Selector lever in other positions.	Battery voltage
8	P	CAN L	-		-
9	R	Starter relay	Courtesy of SUZUKI OF AMERICA CORP.	Selector lever in "N", "P" positions.	Battery voltage
				Selector lever in other positions.	0V
10	B	Ground	Always		0V