DTC Troubleshooting
DIAGNOSIS PROCEDURE
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Electronic Stability Program Check" performed? | Go to Step 2. | Go to ELECTRONIC STABILITY PROGRAM CHECK . |
| 2 | Check DTC
Is there any DTC(s) other than C1038 and C1090? |
Go to applicable DTC diag. flow. | Go to Step 3. |
| 3 | Check ESP® control module
Is DTC C1038 still detected? |
Substitute a known-good ESP® hydraulic unit/control module assembly and recheck. | Steering angle sensor was malfunction. |