Diagnosis Using Output Test Function of SUZUKI Scan Tool
SUZUKI scan tool has the output test function which can force operation of following actuators and relays of the system controlled by BCM. When a malfunction is found in the system controlled by BCM, execute the output test which enables easy judgment whether the malfunction is on the input side or output side of BCM. For detailed information on operation of SUZUKI scan tool, refer to SUZUKI Scan Tool Operator's Manual.
SUZUKI SCAN TOOL FUNCTIONS REFERENCE
| Output Test Item | Controlled Parts |
|---|---|
| Hazard Warning Light | Turn signal and hazard warning relay |
| Interior (Dome) Light | Interior (Dome) light (when interior light switch is at DOOR position) |
| Tail Light | Tail light relay |
| Front Fog Light | Front fog light relay (when lighting switch is at HEAD position) |
| Rear defogger | Rear end door window defogger relay |
| DRL | Headlight low beam |
| Rear end door open | Rear end door opener relay |
| Door | Each door lock actuator |
| Warning buzzer | Warning buzzer (in BCM) |
| Rear wiper | Rear wiper relay |
| Alarm indicator | Theft deterrent light (in information display or clock) |
| Pass Seatbelt Indicator | Passenger seat belt reminder light |
| Dimmer LED | Illumination control of LED (when lighting switch is at CLEARANCE or HEAD position) |
| Dimmer Bulb | Illumination control of bulb (when lighting switch is at CLEARANCE or HEAD position) |
| Horn | Horn relay |