Seat Temperature Control Module: Testing and Inspection

Inspection Of Seat Heater Control Module (If Equipped)

Seat heater control module can be checked by measuring voltage and resistance at connectors.

CAUTION: Do not check seat heater control module by directly applying tester probes to its terminal with connector disconnected.

Voltage Check

1. Remove driver seat.
2. Remove seat heater control module from driver seat with connector connected.
3. Check terminal voltage using voltmeter.

NOTE:
- Confirm that battery voltage is 11 V or more.
- An "ignition mode" in the following table represents a power supply mode available with the keyless push start system. For more details, refer to Description of Keyless Engine Start Function.