Electric Throttle Body Assembly On-Vehicle Inspection: Notes
WARNING:
Never touch throttle valve with finger while ignition mode of keyless push start system is in "ON" and accelerator pedal is depressed. Otherwise, injury may result from getting a finger caught between throttle valve and throttle body.
CAUTION:
- Do not disassemble electric throttle body assembly.
- Do not drop electric throttle body assembly or subject it to strong impact. If the electric throttle body assembly is subjected to strong impact it must be replaced.
- Be careful to prevent foreign materials such as dust or metallic particles from coming into contact with throttle body and throttle valve.
Otherwise, electric throttle body assembly will break down by throttle valve accretion.
- Do not apply excessive force to throttle valve for throttle valve operation check and TP sensor performance check.
Otherwise, electric throttle body assembly will break down by damaging internal resinous gear of throttle valve actuator.
NOTE:
After replacing electric throttle body assembly, calibrate throttle valve position, see THROTTLE BODY ASSEMBLY REMOVAL AND INSTALLATION
.