Removal Procedure
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the negative battery cable. Refer to REMOVAL PROCEDURE .
- Mark the location of the battery current sensor on the battery cable with tape for reference during installation.
- Remove the tape securing the battery current sensor to the negative battery cable.
- Mark the location of the negative battery cable clips and remove the clip from the cable.
- Squeeze the negative battery cable branches together.NOTE: Note the orientation of the battery current sensor prior to removal.
- Slide the battery current sensor (1) off of the negative battery cable.