LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Immobilizer System) >> Diagnostic Information and Procedures >> Scan Tool Data List - Immobilizer >> Engine Control Module (ECM)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module (ECM)

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
SCAN TOOL DATA LIST - ENGINE CONTROL MODULE (ECM)

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON, Engine OFF 
ECM Authentication Status Engine Electrical Unknown/Incorrect/Negative/Valid Valid
ECM Challenge Status Engine Electrical Valid/Invalid Valid
ECM Response Source Engine Electrical Normal/Remote Start Normal
VTD Auto Learn Counter Engine Electrical Counts Varies
VTD Auto Learn Timer Engine Electrical Active/Inactive Inactive
VTD Password Learn Enabled Engine Electrical Yes/No No
VTD Security Code Accepted Engine Electrical Yes/No Yes
VTD Security Code Lockout Engine Electrical Active/Inactive Inactive
VTD Security Code Programmed Engine Electrical Yes/No Yes
VTD Security Info Programmed Engine Electrical Yes/No Yes
VTD System Status Engine Electrical Standby/Fuel Disable/Dis. No Resp./Dis. Neg. Resp./Dis. Incor. Resp./Post Release/Pre-Release/Released Released