LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Charging System) >> Repair Instructions >> Generator Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Generator, Positive Battery Cable, Nut And Terminal
G04843523Courtesy of SUZUKI OF AMERICA CORP.
  1. Disconnect the negative battery cable. Refer to REMOVAL PROCEDURE .
  2. Reposition the positive battery cable boot at the generator terminal.
  3. Remove the positive battery cable nut at the generator.
  4. Remove the positive battery cable terminal from the generator.
    Fig 2: Engine Harness Electrical Connector And Generator
    G04843524Courtesy of SUZUKI OF AMERICA CORP.
  5. Disconnect the engine harness electrical connector from the generator.
  6. Remove the drive belt. Refer to REMOVAL PROCEDURE .
    Fig 3: Idler Pulley, Generator And Mounting Bolts
    G04843525Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove the idler pulley. Refer to REMOVAL PROCEDURE .
  8. Remove the generator bolts.
    NOTE: When removing the generator from the vehicle, it may be necessary to maneuver the generator to remove it from the vehicle.
  9. Remove the generator.
scientia non olet · About LEMON Manuals