Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Input Speed Sensor (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

Apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new input speed sensor O-ring.
Install the new input speed sensor O-ring onto the input speed sensor.
Install the input speed sensor to the transaxle.
CAUTION: Refer to FASTENER NOTICE .
Install the input speed sensor bolt.
Tightening torque

Tighten the bolt to 6 N.m (53 lb in) .

Fig 2: Identifying Input Speed Sensor & Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Connect the electrical connector (4) to the input speed sensor.
Install the battery tray. Refer to BATTERY TRAY REPLACEMENT .