Remote Control Door Lock Receiver Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Remote Control Door Lock Receiver Component And Placement

Courtesy of SUZUKI OF AMERICA CORP.

REMOTE CONTROL DOOR LOCK RECEIVER REPLACEMENT REFERENCE

Callout	Component Name
Preliminary Procedure Remove the right side lock pillar upper garnish molding. Refer to LOCK PILLAR UPPER GARNISH MOLDING REPLACEMENT (LEFT SIDE) and LOCK PILLAR UPPER GARNISH MOLDING REPLACEMENT (RIGHT SIDE) .
1	Remote Control Door Lock Receiver Tip: Push in on the upper two integral tabs to release the receiver from the body side.