Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Install a NEW heater inlet pipe housing seal.
CAUTION: Refer to FASTENER NOTICE .
Install the heater inlet pipe housing bolts (1).
Tightening torque

Tighten the heater inlet housing bolts to 10 N.m (89 lb in) .

Fig 1: Identifying Heater Inlet Hose
Courtesy of SUZUKI OF AMERICA CORP.
Install the heater inlet hose (1) to the heater inlet pipe.
Refill the cooling system. Refer to DRAINING AND FILLING COOLING SYSTEM (LY7 GE 47716 FILL) and DRAINING AND FILLING COOLING SYSTEM (LY7 STATIC FILL) .