Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnecting Engine Wiring Harness Electrical Connector

Courtesy of SUZUKI OF AMERICA CORP.

Turn the ignition OFF.
Using a scan tool, retrieve the percentage of remaining engine oil and the remaining automatic transmission fluid life. Record the remaining engine oil and the remaining automatic transmission fluid life.
Disconnect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECTION AND CONNECTION .
Disconnect the engine wiring harness electrical connector (2) from the ECM.
CAUTION: In order to prevent any possible electrostatic discharge damage to the ECM, do not touch the connector pins.

Fig 2: Identifying ECM Retainer
Courtesy of SUZUKI OF AMERICA CORP.
Grasp the ECM retainer and slide the retainer rearward until the retainer disengages from the 4 clips on the battery cover.

Fig 3: Identifying ECM Retainer Clip
Courtesy of SUZUKI OF AMERICA CORP.
Disengage the clips (1) on the ECM retainer from the ECM, and slide the ECM out of the retainer.