ABS Control Module

The parameter data below are values measured with the scan tool when the normally operating vehicle is under the following conditions. When taking measurements for comparison by using the scan tool, be sure to check that the vehicle is under the following conditions.

• Parking brake lever is pulled up fully and wheels are blocked with chocks.
• Ignition switch is at ON position.
• Air conditioner turns OFF (if equipped).
• Power steering is not operating (steering wheel is at straight-ahead position and released) (if equipped).
• All electrical loads turn OFF (except ignition).
• ABS control module has no DTC.
• ABS is not operating. (Normal braking operation)