DTC Troubleshooting
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | DTC recheck
Is DTC P0602 still detected? |
Go to Step 2. | Check for intermittent trouble. Refer to INTERMITTENT AND POOR CONNECTION INSPECTION . |
| 2 | ECM reprogramming check Was reprogramming of ECM executed? |
Execute reprogramming of ECM correctly once again. | Go to Step 3. |
| 3 | ECM power and ground circuit check
Is it in good condition? |
Repair or replace defective wire harness. | Substitute a known-good ECM and recheck. |