Tightening Torque Specifications
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Door latch screw | 5.0 | 0.5 | 4.0 |
| Door latch striker screw | 10 | 1.0 | 7.5 |
| Rear end door latch bolt | 10 | 1.0 | 7.5 |
| Rear end door striker screw | 23 | 2.3 | 17.0 |
| Trunk lid latch bolt | 4.5 | 0.45 | 3.5 |
| Trunk lid latch striker bolt | 4.5 | 0.45 | 3.5 |
NOTE:
The specified tightening torque is described in the following.
FRONT DOOR LOCK ASSEMBLY COMPONENTS
REAR DOOR LOCK ASSEMBLY COMPONENTS
REAR END DOOR LOCK ASSEMBLY COMPONENTS (HATCHBACK)
TRUNK LID LOCK ASSEMBLY COMPONENTS (SEDAN)
FRONT DOOR LOCK ASSEMBLY COMPONENTS
REAR DOOR LOCK ASSEMBLY COMPONENTS
REAR END DOOR LOCK ASSEMBLY COMPONENTS (HATCHBACK)
TRUNK LID LOCK ASSEMBLY COMPONENTS (SEDAN)
Reference:
For the tightening torque of fastener not specified in this article, refer to FASTENERS INFORMATION .