Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Starting motor cable nut | 11 | 1.1 | 8.5 |
| Starting motor mounting bolt | 45 | 4.6 | 33.5 |
| Brush holder screw | 3.5 | 0.36 | 3.0 |
| End housing bolt | 6.0 | 0.61 | 4.5 |
| Magnetic switch screw | 6.0 | 0.61 | 4.5 |
| Lead wire nut | 10 | 1.0 | 7.5 |
NOTE:
The specified tightening torque is described in the following.
Reference:
For the tightening torque of fastener not specified in this section, refer to :