Scan Tool Data: ECM
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
As data values are standard values estimated on the basis of values obtained from normally operating vehicles by using scan tool, use them as reference values. Even when vehicle is in good condition, there may be cases where a checked value does not fall within the specified data range. Therefore, judgment as abnormal should not be made by checking with this data only.
Also, conditions that can be checked by scan tool are those detected by ECM and output from ECM as commands and there may be cases where engine or actuator is not operating (in the condition) as indicated by the scan tool.
SCAN TOOL DATA REFERENCE
| Scan tool data | Vehicle condition | Normal condition/Reference values |
|---|---|---|
| Cruise CANCEL Switch | CANCEL switch pressed | ON |
| CANCEL switch released | OFF | |
| Cruise RES/ACC Switch | RES/ACC switch pressed | ON |
| RES/ACC switch released | OFF | |
| Cruise SET/COAST Switch | SET/COAST switch pressed | ON |
| SET/COAST switch released | OFF | |
| Cruise ON/OFF Switch | Cruise ON/OFF switch pressed | Pushed |
| Cruise ON/OFF switch released | Released |