Scan Tool Utility Table
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
SUZUKI scan tool has setting change function of keyless start control module as follows. For more information, refer to SUZUKI Scan Tool Operator's Manual.
SCAN TOOL UTILITY CHART
| Item | Setting | Description |
|---|---|---|
| Keyless Start System | ON/OFF | Setting of each inside and outside antenna (radio wave transmission allowed/not allowed) is changed. |
| Answer-back (Outside buzzer) | ON/OFF | Setting (active/passive) for outside warning buzzer during answer-back is changed. |
| Remote Controller Area Warning | ON/OFF | Setting (active/passive) for warning buzzer (in combination meter) during remote controller out of detection area alarm is changed. |
| Remote Controller Battery Warning | ON/OFF | Setting (active/passive) for remote controller battery run down warning is changed. |
| Security Alarm | ON/OFF | Setting (active/passive) of security alarm is changed. |