Precautions for Replacing Keyless Start Control Module

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

When replacing the keyless start control module, replace it with a new one.
After keyless start control module is replaced with new one, perform "Immobilizer Key Registration" using SUZUKI scan tool, see Remote Controller Registration .
When keyless start control module and ECM are replaced at the same time, refer to PROCEDURE AFTER ECM REPLACEMENT for their registration.
All of remote controllers must be ready for the registration.