LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Keyless Start System) >> Repair Instructions >> Keyless Start Control Module Registration
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Start Control Module Registration

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

After keyless start control module is replaced with new one, register remote controller ID code in keyless start control module using SUZUKI scan tool and immobilizer cable.

  1. Prepare all of remote controllers ready for registration.
  2. Perform "Immobilizer Key Registration" in "Immobilizer" menu indicated on SUZUKI scan tool. Refer to SUZUKI SDT Immobilizer Control System Operator's Manual.
    NOTE: When ECM and keyless start control module are replaced with new ones at the same time, perform "Immobilizer Key Registration" instead of "ECM Registration" using SUZUKI scan tool and immobilizer cable. Refer to SUZUKI SDT Immobilizer Control System Operator's Manual for the immobilizer registration.
scientia non olet · About LEMON Manuals