Scan Tool Utility Table
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
SUZUKI scan tool has setting change function of BCM as follows. For more information, refer to SUZUKI Scan Tool Operator's Manual.
SCAN TOOL UTILITY CHART
| Item | Setting | Description |
|---|---|---|
| Turn Signal Light | 0/+1/+2/+3 | For situations such as lane changes, it is possible to set the number of times the turn signal lights flash when turn signal switch is momentarily switched on and off. 0: Turn signal lights flash on and off once when turn signal switch is turned on 1 time. +1: Turn signal lights flash on and off 2 times when turn signal switch is turned on 1 time. (+1 time on and off for 1 time switching on) +2: Turn signal lights flash on and off 3 times when turn signal switch is turned on 1 time. (+2 time on and off for 1 time switching on) +3: Turn signal lights flash on and off 4 times when turn signal switch is turned on 1 time. (+3 time on and off for 1 time switching on) |