Inspection of P/S Control Module and Its Circuits: Notes

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

P/S control module (1) and its circuits can be checked at P/S control module wiring connectors (2) by measuring voltage and resistance.

CAUTION:

P/S control module cannot be checked by itself. It is strictly prohibited to connect tester to the P/S control module with connectors disconnected from the P/S control module.
Make sure to observe instructions for checking electrical system, see ELECTRICAL CIRCUIT INSPECTION PROCEDURE .

Fig 1: Identifying P/S Control Module Wiring Connectors Terminals
Courtesy of SUZUKI OF AMERICA CORP.