Tire Pressure Sensor Registration: Notes
NOTE:
In the following procedure, a Transmitter Activation Tool (VT55 by ATEQ, is recommended) is used. A SUZUKI-SDT scan tool is optional.
NOTE:
If spare tire has been mounted, or if a wheel or tire pressure sensor has been replaced, the tire pressure sensors must be registered.
NOTE:
Only up to 4 ID codes of the tire pressure sensor can be registered in TPM system controller. The TPM system controller is not, by default, programmed to recognize the ID code of the tire pressure sensor in the spare tire. The ID must be registered into the system before it will become active.