Drive Unit - Front (2nd Generation) - Remove And Install: Notes
Last modified: 18/11/2022 10:15:01
Special tools required for this procedure:
| Supplier | Part Number | Description |
|---|---|---|
| Tesla | 1090880-00-A or 1090880-01-A | Steering Wheel Holder (Hunter or Beissbarth) |
| Tesla | 1066521-00-A | Powertrain Table |
| Tesla | 1096075-00-A | Hydraulic Hub Puller |
| Tesla | 1498673-00-A | Axle Remover Cable Kit |
| Tesla | 1122937-00-A | Cooling Hose Service Plug Kit |
| Tesla | 1081765-01-B | Transmission Jack |
| Tesla | 1494178-00-A | MS/MX Raven FDU Cradle |
NOTE:
This procedure might contain steps to use Toolbox 2 to supplement the service operation. Toolbox 2 and its Panels are being phased out and replaced with Toolbox 3 routines.
This procedure is for vehicles built after April 24, 2019. For vehicles built through April 24, 2019, see DRIVE UNIT - FRONT (1ST GENERATION) (REMOVE AND INSTALL) .