Module - Autopilot - ECU - 2nd Generation - Remove And Replace: Installation

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.

Installation procedure is the reverse of removal, except for the following:

Install new nuts (x4) that attach the car computer to the cross car beam.
Reinstall the latest vehicle firmware, or update the firmware if not the latest. See Firmware Reinstall - Touchscreen or Firmware Update .
NOTE: Make sure all patches are applied before updating firmware, which might require alternative methods for completion.