LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Tesla >> 2021 >> Model S Performance >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Electrical System (2 Of 2) -- Model 3) >> Electronic Control Modules >> Module - Body Controller - RH - Remove and Replace >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Tesla Model 3, 2022 Tesla Model 3, 2021 Tesla Model 3, 2020 Tesla Model 3, and 2019 Tesla Model 3. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS: MODULE - BODY CONTROLLER - RH (REMOVE AND REPLACE)

Description Torque Value Recommended Tools Reuse/Replace Notes
Nuts (x2) that attach the RH side carpet locator bracket to the vehicle 2.5 N.m (1.8 ft-lbs) 
  • 10 mm socket
  • 1/4 in std ratchet
  • 2 in extension
Reuse  
Nuts that attach the electrical wiring to the RH body controller module  
  • 10 mm deep socket
  • 1/4 in std ratchet
  • 1/4 in torque wrench (installation only)
  • 2 in extension
Replace  
Nut that attaches the DCDC positive cable from the RH body controller module 8.5 N.m (6.3 ft-lbs) 
  • 10 mm 12-point deep socket
  • 1/4 in std ratchet
  • 1/4 in torque wrench (installation only)
  • 2 in extension
2 in extension  
Nut that attaches the RH body controller module to the body  
  • 10 mm socket
  • 1/4 in std ratchet
  • 1/4 in torque wrench (installation only)
  • 2 in extension
Replace