Module - Steering Column Control - Remove and Replace: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Tesla Model 3, 2022 Tesla Model 3, 2021 Tesla Model 3, 2020 Tesla Model 3, and 2019 Tesla Model 3. However, it is still accessible from the selected car via links, so may be relevant.
Last modified: 30/11/2023 01:57:37
NOTE:
See Personal Protection
to make sure to wear proper PPE when performing below procedure.
Revision History:
- 2023-11-30: Replaced Toolbox routine "PROC-VCLEFT_X_STEERING-COLUMN-CALIBRATION" with "PROC_STEERING_COLUMN_CALIBRATION".
- 2023-08-28: Updated Toolbox routines to be run after SCCM installation.