LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Tesla >> 2021 >> Model S Performance >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Wheel And Tires -- Model Y) >> Tire Pressure Monitoring System (TPMS) >> TPMS - Sensor ID Drive Learn >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

TPMS - Sensor ID Drive Learn: Procedure

WARNING: This page is about a different car, the 2024 Tesla Model Y, 2023 Tesla Model Y, 2022 Tesla Model Y, 2021 Tesla Model Y, and 2020 Tesla Model Y. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open LH front door.
  2. Connect to the vehicle with Toolbox 3.0 TOOLBOX 3 - CONNECT AND DISCONNECT
  3. In Toolbox, select the Actions/Autodiag  tab, and then enter "TPMS vsec".
  4. Select PROC_VCSEC_X_TPMS-ERASE-SENSOR-ID  , and then click Run  .
    NOTE: Click the "X" at the top of the window after the routine is complete.
  5. On the touchscreen, confirm that all TPMS values have been erased.
    NOTE: TPMS values will display a dash if erased.
  6. Disconnect the laptop from the vehicle.
  7. Test drive the vehicle to at least 15 mph (24 kph) for 1-3 minutes to reconnect the TPMS sensors.
  8. Confirm on the vehicle touchscreen that all 4 TPMS sensors are providing tire pressure readings.
scientia non olet · About LEMON Manuals