Torque Specifications

WARNING: This page is about a different car, the 2024 Tesla Model Y, 2023 Tesla Model Y, 2022 Tesla Model Y, 2021 Tesla Model Y, and 2020 Tesla Model Y. However, it is still accessible from the selected car via links, so may be relevant.

TORQUE SPECIFICATIONS - FENDER ASSEMBLY - FRONT - LH (REMOVE AND REPLACE)

Description	Torque Value	Recommended Tools	Reuse/Replace
Bolts that attach the top of the front fascia to the vehicle	4 N.m (2.9 ft-lbs)	10 mm socket 1/4 in std ratchet 2 in extension Wurth 1/4 in hexagon 1 N.m - 5 N.m torque wrench (installation only) 1/4 in hex to 1/4 in square 2 in adapter	Reuse
Bolt that attaches the LH front wheel liner to the HV battery	5 N.m (3.7 ft-lbs)	10 mm socket 4 in extension	Reuse
Bolt that attaches the LH corner of the front fascia to the fender	4 N.m (2.9 ft-lbs)	10 mm socket 1/4 in std ratchet Wurth 1/4 in hexagon 1 N.m - 5 N.m torque wrench (installation only) 1/4 in hex to 1/4 in square 2 in adapter	Reuse/Replace
Bolt that attaches the RH corner of the front fascia to the fender	4 N.m (2.9 ft-lbs)	10 mm socket 1/4 in std ratchet Wurth 1/4 in hexagon 1 N.m - 5 N.m torque wrench (installation only) 1/4 in hex to 1/4 in square 2 in adapter	Reuse
Bolts that attach the upper LH front fender bracket to the body	9.8 N.m (7.2 ft-lbs)	10 mm deep socket 4 in extension	Reuse
Bolt that attaches the LH front fender bracket to the body	9.8 N.m (7.2 ft-lbs)	10 mm deep socket 4 in extension	Reuse
Bolt that attaches the rear LH front fender bracket to the body	9.8 N.m (7.2 ft-lbs)	10 mm deep socket 4 in extension	Reuse
Nuts that attach the lower LH front fender bracket to the body	9.8 N.m (7.2 ft-lbs)	10 mm deep socket 4 in extension	Reuse