Module - Body Controller - BCM - Remove And Replace: Removal
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
- Move the passenger seat fully rearward for access.
- Disconnect 12V power. See DISCONNECT 12V POWER .
- Remove the RH center console closeout extension. See: Assembly - Closeout Extension - LH - Center Console (Remove And Replace) .
- Remove the passenger side dash footwell closing trim. Refer to Assembly - Cover - Footwell - Passenger's (Remove And Replace) .
- Carefully peel back the carpet for access to the Body Control Module (BCM) cover.CAUTION: Take care not to damage component(s).
- Remove the bolts (x4) that secure the BCM cover to the mounting bracket (torque 5 N.m).
- Remove the BCM cover.
- Carefully release the BCM from the mount. Disconnect the harness connectors (x9) from the BCM.CAUTION: Protect disconnected optical connectors from contamination and dirt ingress.
- Remove the BCM from the footwell.