LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Tesla >> 2021 >> Model S Performance >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Electrical System -- Model S) >> Electronic Control Modules >> Module - Intrusion Sensor - Remove And Replace >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module - Intrusion Sensor - Remove And Replace: Removal

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a trim tool to release the clips (x2) that attach the rear of the overhead console, and then pull the rear of the overhead console down.
    NOTE: Make sure not to damage the harness connections inside of the headliner.
    G15034762Courtesy of TESLA, INC.
  2. Disconnect the headliner electrical harness from the microphone connectors (x2) and the intrusion sensor connector, and then remove the overhead console with the intrusion sensor module from the vehicle.
    G15034763Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals