Calibration - Front Radar Sensor: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
Last modified: 05/10/2023 12:48:27
Revision History:
- 2023:-10-06: Added increase/decrease direction for clockwise/counterclockwise values in Alignment Adjustment table.
- 2023-06-16: Replaced steps for the Toolbox 3 Tools tab.
Choose the appropriate correction code based on the vehicle's date of manufacture:
Special tools required for this procedure:
| Vehicle Build Date | Part Number | Description |
| Vehicles built through April 10, 2016 | 1056984-00-A 1056723-00-D |
Radar calibration bubble level Nut driver, 3.5 mm |
| Vehicles built between April 10, 2016 and August 20, 2017 | 1056984-00-A 1109688-00-A |
Radar calibration bubble level Tool, radar bracket adjustment |
| Vehicles built after August 20, 2017 | 1076714-00-A 1120568-00-A 1115110-00-A |
4-Piece mini soft grip awl, hook & picks set Bit, T25 Torx, 70 mm Skt, 1/4" dr, E5 Torx external |