Enable Service Mode Via Toolbox 3
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
- Connect a laptop with Toolbox 3 to the vehicle. See Toolbox 3 - Connect and Disconnect .
- Unlock the vehicle gateway. See Gateway Unlock .
- In Toolbox 3, click the Actions tab, type "Service" into the search field, click PROC_ICE_X_ENTER-SERVICE-MODE, click Run , and then allow the routine to complete.
- Return to the procedure that required Service Mode to be enabled.