Adjust Front Toe

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Tesla Model 3, 2022 Tesla Model 3, 2021 Tesla Model 3, 2020 Tesla Model 3, and 2019 Tesla Model 3. However, it is still accessible from the selected car via links, so may be relevant.

If the front toe is within specification and does not require adjustment, complete the alignment. See COMPLETE THE ALIGNMENT .
Loosen the jam nut on the LH inner tie rod.

Courtesy of TESLA, INC.
Rotate the LH inner tie rod to adjust the front LH toe to specifications. See WHEEL ALIGNMENT .
- To add positive toe in, move the tie rod end in toward the centerline.
- To add negative toe out, move the tie rod end out from the centerline.
Courtesy of TESLA, INC.
When the front LH toe is correct, tighten the jam nut on the LH inner tie rod.
80 N.m (59.0 ft-lbs)
Perform step 2 through step 4 for the RH side of the vehicle if necessary.
Complete the alignment. See COMPLETE THE ALIGNMENT .