Subframe Assembly - Front (3rd Generation) - Remove And Install: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
Last modified: 18/11/2022 10:20:59
Special tools required for this procedure:
| Supplier | Part Number | Description |
|---|---|---|
| Tesla | 1060616-00-B | Wheel Nut Cover Removal Tool |
| Tesla | 1135762-00-A | Cooling Hose Plug Kit |
| Tesla | 1027589-00-E | Subframe Fixture |
| Tesla | 1066521-00-A | Powertrain Table |
NOTE:
This procedure might contain steps to use Toolbox 2 to supplement the service operation. Toolbox 2 and its Panels are being phased out and replaced with Toolbox 3 routines.
This procedure is for vehicles built after April 24, 2019.
For other generation front subframe assemblies, see also: