TPMS - Sensor ID Drive Learn: Procedure
WARNING: This page is about a different car, the 2024 Tesla Model X, 2023 Tesla Model X, 2022 Tesla Model X, and 2021 Tesla Model X. However, it is still accessible from the selected car via links, so may be relevant.
- Connect a laptop with Toolbox 3 to the vehicle. See Toolbox 3 (Connect and Disconnect) .
- Click the Actions tab, and then search for "TPMS Erase."
- Click PROC_VCSEC_X_TPMS-ERASE-AND-AUTOLEARN
, and then click Run
. Allow the routine to complete.NOTE: This action erases stored TPMS Sensor IDs.
- Disconnect the laptop with Toolbox 3 from the vehicle. See Toolbox 3 (Connect and Disconnect) .
- Drive the vehicle a short distance to verify all four TPMS sensor values are displaying on the touchscreen.NOTE: The sensors will begin displaying values at approximately 5 mph. When vehicle receives communication from the sensors with known IDs, It will quickly connect to them. If tire pressures do not populate, rescan each sensor and try again.