Service Mode Plus: Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Tesla Model 3, 2022 Tesla Model 3, 2021 Tesla Model 3, 2020 Tesla Model 3, and 2019 Tesla Model 3. However, it is still accessible from the selected car via links, so may be relevant.
- Connect a laptop with Toolbox 3 to the vehicle. See Toolbox 3 (Connect and Disconnect) NOTE: Upon successful connection, Service Mode Plus will be enabled, and the "Service Mode Plus" watermark will appear on the touchscreen.
- When finished performing the tasks that required Service Mode Plus, touch the Exit Service Mode
button at the top of the Service Mode menu.NOTE: If the Exit Service Mode button is not visible, touch and hold the Tesla "T" at the top of the touchscreen, and then type "service" into the prompt.
- Disconnect the laptop from the vehicle. See Toolbox 3 (Connect and Disconnect)