Solenoid Relay Circuit Operation

Connect battery positive to terminal No. 6 and battery negative to terminal No. 7. See Fig 2. Using a DVOM, there should be continuity between terminals No. 2 and 4. If reading is not as specified, replace control relay.

Fig 1: Connector Terminal ID (Camry, Camry All-Trac & Celica All-Trac)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Connector Terminal ID (Celica, Except Celica All-Trac)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Connector Terminal ID (Cressida)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 4: Connector Terminal ID (Supra)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002