LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1987 >> Camry Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Cooling System) >> Component Testing >> Radiator Fan Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Radiator Fan Switch

WARNING: This page is about a different car, the 1988 Toyota Celica and 1987 Toyota Celica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Radiator fan switch is located in upper radiator hose coolant inlet on engine. Switch has single wire.
  2. To test switch, remove switch from vehicle. Using ohmmeter, ensure continuity is correct between wire connector and switch body. Switch may be gradually heated in water for testing. See appropriate RADIATOR FAN SWITCH CONTINUITY table.
RADIATOR FAN SWITCH CONTINUITY (1)

Model No Continuity °F (°C) Continuity °F (°C)
Celica Above 199 (93) Below 181 (83)
(1) As measured between between wire connector and switch body.