Steering System - Electronic Power: Testing: Computer
Raise vehicle and support on chassis stands. Remove glove box or console. DO NOT disconnect computer. Start engine. Using a voltmeter, check that there is no voltage between computer terminals "SOL +" and "SOL-" with engine idling. Place transmission in gear and raise vehicle speed to test specification. If voltage is not to specification, replace computer.
COMPUTER VOLTAGE SPECIFICATIONS
| Application | Vehicle Speed MPH (KPH) | Voltage | |
|---|---|---|---|
| Cressida | |||
| "SOL(-)"-to-"Ground" | 31 (50) | 0.16±0.02 | |
| "SOL(-)"-to-"Ground" | 62 (100) | 0.32±0.04 | |
| Pickup & 4Runner | |||
| "SOL(-)"-to-"Ground" | 31 (50) | 3.12±1 | |