Notes On Trouble Codes
WARNING: This page is about a different car, the 1990 Toyota Celica and 1989 Toyota Celica. However, it is still accessible from the selected car via links, so may be relevant.
- No other code will appear with code 11.
- When the malfunction in the system is repaired, the "CHECK ENGINE" light will go off but, the trouble code will remain in memory until the code is cleared.
- If trouble code 51 is still displayed after clearing the ECU memory, check if A/C switch is "OFF" and throttle valve is fully closed. Place gearshift lever in "P" or "N". Clear trouble code again. If code will not clear, recheck switches and circuit.
- If a malfunction occurs in test mode, the "CHECK ENGINE" light will remain on (all except code 51). ECU will erase all trouble codes when the ignition switch is turned off in test mode.