Secondary Coil Resistance Test

Disconnect ignition coil so it is isolated from remainder of system. Using an ohmmeter, measure resistance between coil positive (+) terminal and coil tower. See IGNITION COIL RESISTANCE table. See Fig 1.
If resistance is not within specification, replace ignition coil. If resistance is within specification, proceed to PICK-UP COIL RESISTANCE TEST .

Fig 1: Testing Ignition Coil Secondary Resistance

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

IGNITION COIL RESISTANCE

Primary Ohms ⁽¹⁾

Secondary Ohms ⁽¹⁾

.52-.64

11,500-15,500

⁽¹⁾	Check at room temperature.