Neutral/Start Switch
Unplug switch connector at transmission or transaxle. Note terminal identification. See Fig 1. Using ohmmeter, check for continuity at specified terminals with gearshift in correct range. See NEUTRAL/START SWITCH SPECIFICATIONS table.
NEUTRAL/START SWITCH SPECIFICATIONS
| Application & Gearshift Position | Terminal Continuity | |
|---|---|---|
| 2.5L Engine | ||
| P | B & N, RB & PL | |
| R | RL & RB | |
| N | B & N, RB & NL | |
| 2 | 2L & RB | |
| L | LL & RB | |
| 2.0L Engine | ||
| N | NL & C | |
| 2 | 2L & C | |
| L | LL & C | |