Power Mirror Motor Test
NOTE:
Mirror motor connectors may vary in configuration from vehicle to vehicle of the same model.
Disconnect power mirror motor harness connector. Using 12-volt power source, connect positive and negative leads to specified pins or terminals. See appropriate POWER MIRROR MOTOR TEST table. See Figure- Figure . If power mirror motor fails any test, replace power mirror assembly.
POWER MIRROR MOTOR TEST (CAMRY, CELICA & MR2)
| Apply 12 Volts To Pin No. | Ground Pin No. | Mirror Operation |
|---|---|---|
| 3 | 2 | Up |
| 2 | 3 | Down |
| 1 | 2 | Left |
| 2 | 1 | Right |
POWER MIRROR MOTOR TEST (COROLLA)
| Apply 12 Volts To Pin No. | Ground Pin No. | Mirror Operation |
|---|---|---|
| 1 | 2 | Up |
| 2 | 1 | Down |
| 3 | 2 | Left |
| 2 | 3 | Right |
POWER MIRROR MOTOR TEST (LAND CRUISER)
| Apply 12 Volts To Pin No. | Ground Pin No. | Mirror Operation |
|---|---|---|
| 2 | 3 | Up |
| 3 | 2 | Down |
| 1 | 3 | Left |
| 3 | 1 | Right |
POWER MIRROR MOTOR TEST (PICKUP, PREVIA & 4RUNNER)
| Apply 12 Volts To Pin No. | Ground Pin No. | Mirror Operation |
|---|---|---|
| 2 | 1 | Up |
| 1 | 2 | Down |
| 3 | 1 | Left |
| 1 | 3 | Right |
POWER MIRROR MOTOR TEST (SUPRA)
| Apply 12 Volts To Pin No. | Ground Pin No. | Mirror Operation |
|---|---|---|
| 3 | 4 | Up |
| 4 | 3 | Down |
| 5 | 4 | Left |
| 4 | 5 | Right |
POWER MIRROR MOTOR TEST (T100)
| Apply 12 Volts To Pin No. | Ground Pin No. | Mirror Operation |
|---|---|---|
| 3 | 1 | Up |
| 1 | 3 | Down |
| 2 | 1 | Left |
| 1 | 2 | Right |