LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1993 >> Supra 2JZ-GTE, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Traction Control System >> Bleeding Brake System >> Brake System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake System

  1. Ensure master cylinder reservoir is full of clean brake fluid. Bleed master cylinder first. Then, connect hose to wheel cylinder bleeder screw and insert other end of hose in a clear container 1/4 full of clean brake fluid. Start on wheel with longest hydraulic line, and work toward wheel with shortest hydraulic line.
  2. Slowly pump brake pedal several times. While holding brake pedal down, loosen bleeder screw until fluid starts to flow out, and then close bleeder screw. Repeat operation until no bubbles are present in fluid. Tighten bleeder screw to 74 INCH lbs. (8.3 N.m).
scientia non olet · About LEMON Manuals